Standard Power Steering Unit with Integral Valves

Standard Power Steering Unit with Integral Valves

Features

• Same figure as standard model
• Inlet relief valve within housing
• Suitable for small and medium vehicles
• Reduced noise steering system
• Attachable valve blocks : priority, flow divider, flow control valve, etc.
• Special functions according to customer's request are available. : high back pressure, low slip gerotor, low input torque, etc.

Specifications

• Max. System Pressure: 175kgf/cm²(17.2MPa)
• Rated Flow: 16 L/min
• Relief Pressure Range: 60~175 kgf/cm²(5.9~17.2 MPa)
• Max. Back Pressure: 20kgf/cm²(2.0MPa)
• Steering Input Torque: 0.2kgf.m
• Max. System Operation Temperature: 95°C
• Recommended Filtration: nominal 10μm
• System: Open center(non load reaction or load reaction) Load sensing(static or dynamic signal)Closed center

Dimensions

Code and specification